LYRIC 50
clean. However the surface will dull with time. Aluminium based saucepans can leave shiny metal marks on the If you look after the burner crowns in this way they will stay reasonably
g in n a le c d n a re a C
pan supports. To clean the pan supports regularly remove the marks using a mild abrasive like 'Jif' with a soft scourer. For more stubborn marks you can use a soap filled pad such as 'Brillo'. After cleaning the cooker parts, dry them thoroughly before you put them back.
When replacing hotplate burner parts
1. Crown to body (Do not try to force the crown on to the body). Make sure that the hole in the crown is centrally over the electrode. Check that the two longer location pegs sit in the slots in the body. When the crown is in this position let it fall freely on to the body. Check that the crown can be moved slightly from side to side. 2. Cap to crown Place cap centrally on the top of crown (enamel side up). Move sideways and front to back to check the cap is fitted properly. 3. Check for ignition If a burner will not light then you need to check the crown and cap positions.
The grill
Clean the area around the grill frequently using hot soapy water. After use you can soak the pan for a few minutes and then clean it using mild abrasives or a soap filled pad such as 'Brillo'. The grill shelf and support may be removed for cleaning. Clean regularly with hot soapy water. Mild abrasives can be used if necessary. When you want to replace them make sure both the shelf and support are fitted as shown in the diagrams. 21
